配置完xorg.conf.new后死机！请教解决方法！谢谢

[dmlwbd]

我的Xorg.0.log 和 xorg.conf.new 文件内容


X.Org X Server 1.4.0
Release Date: 5 September 2007
X Protocol Version 11, Revision 0
Build Operating System: FreeBSD 6.3-RELEASE i386
Current Operating System: FreeBSD yang.mshome.net 6.3-RELEASE FreeBSD 6.3-RELEASE #1: Thu May 8 19:11:29 CST 2008 root@yang.mshome.net:/usr/obj/usr/src/sys/YANGKR i386
Build Date: 01 December 2007 09:49:15PM

Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Fri May 9 21:37:01 2008
(II) Loader magic: 0x81af380
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.3
X.Org Video Driver: 2.0
X.Org XInput driver : 2.0
X.Org Server Extension : 0.3
X.Org Font Renderer : 0.5
(II) Loader running on freebsd
(II) LoadModule: "pcidata"
(II) Loading /usr/local/lib/xorg/modules//libpcidata.so
(II) Module pcidata: vendor="X.Org Foundation"
compiled for 1.4.0, module version = 1.0.0
ABI class: X.Org Video Driver, version 2.0
(--) Using syscons driver with X support (version 2.0)
(--) using VT number 9

(II) PCI: Probing config type using method 1
(II) PCI: Config type is 1
(II) PCI: stages = 0x03, oldVal1 = 0x80003908, mode1Res1 = 0x80000000
(WW) OS did not count PCI devices, guessing wildly
(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 8086,7190 card 0000,0000 rev 03 class 06,00,00 hdr 00
(II) PCI: 00:01:0: chip 8086,7191 card 0000,0000 rev 03 class 06,04,00 hdr 01
(II) PCI: 00:02:0: chip 104c,ac1b card fffc,0000 rev 03 class 06,07,00 hdr 82
(II) PCI: 00:02:1: chip 104c,ac1b card fffc,0000 rev 03 class 06,07,00 hdr 82
(II) PCI: 00:03:0: chip 8086,1229 card 8086,2205 rev 0c class 02,00,00 hdr 80
(II) PCI: 00:03:1: chip 11c1,045c card 8086,2205 rev 01 class 07,00,00 hdr 80
(II) PCI: 00:05:0: chip 1013,6003 card 1014,0153 rev 01 class 04,01,00 hdr 00
(II) PCI: 00:07:0: chip 8086,7110 card 0000,0000 rev 02 class 06,80,00 hdr 80
(II) PCI: 00:07:1: chip 8086,7111 card 0000,0000 rev 01 class 01,01,80 hdr 00
(II) PCI: 00:07:2: chip 8086,7112 card 0000,0000 rev 01 class 0c,03,00 hdr 00
(II) PCI: 00:07:3: chip 8086,7113 card 0000,0000 rev 03 class 06,80,00 hdr 00
(II) PCI: 01:00:0: chip 5333,8c12 card 1014,017f rev 13 class 03,00,00 hdr 00
(II) PCI: End of PCI scan
(II) Host-to-PCI bridge:
(II) Bus 0: bridge is at (0:0:0), (0,0,5), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 0 I/O range:
[0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) Bus 0 non-prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus 0 prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
(II) PCI-to-PCI bridge:
(II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL: 0x008c (VGA_EN is set)
(II) Bus 1 non-prefetchable memory range:
[0] -1 0 0xf0000000 - 0xf7ffffff (0x8000000) MX[B]
(II) PCI-to-CardBus bridge:
(II) Bus 2: bridge is at (0:2:0), (0,2,4), BCTRL: 0x0740 (VGA_EN is cleared)
(II) PCI-to-CardBus bridge:
(II) Bus 5: bridge is at (0:2:1), (0,5,7), BCTRL: 0x0740 (VGA_EN is cleared)
(--) PCI:*(1:0:0) S3 Inc. 86C270-294 Savage/IX-MV rev 19, Mem @ 0xf0000000/27
List of video drivers:
ati
atimisc
r128
radeon
i810
nv
via
vesa
vga
(II) LoadModule: "ati"
(II) Loading /usr/local/lib/xorg/modules/drivers//ati_drv.so
(II) Module ati: vendor="X.Org Foundation"
compiled for 1.4.0, module version = 6.7.195
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 2.0
(II) LoadModule: "atimisc"
(II) Loading /usr/local/lib/xorg/modules/drivers//atimisc_drv.so
(II) Module atimisc: vendor="X.Org Foundation"
compiled for 1.4.0, module version = 6.7.195
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 2.0
(II) LoadModule: "r128"
(II) Loading /usr/local/lib/xorg/modules/drivers//r128_drv.so
(II) Module r128: vendor="X.Org Foundation"
compiled for 1.4.0, module version = 4.1.0
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 2.0
(II) LoadModule: "radeon"
(II) Loading /usr/local/lib/xorg/modules/drivers//radeon_drv.so
(II) Module radeon: vendor="X.Org Foundation"
compiled for 1.4.0, module version = 4.3.0
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 2.0
(II) LoadModule: "i810"
(II) Loading /usr/local/lib/xorg/modules/drivers//i810_drv.so
(II) Module i810: vendor="X.Org Foundation"
compiled for 1.4.0, module version = 1.6.5
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 2.0
(II) LoadModule: "nv"
(II) Loading /usr/local/lib/xorg/modules/drivers//nv_drv.so
(II) Module nv: vendor="X.Org Foundation"
compiled for 1.4.0, module version = 2.1.6
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 2.0
(II) LoadModule: "via"
(II) Loading /usr/local/lib/xorg/modules/drivers//via_drv.so
(II) Module via: vendor="X.Org Foundation"
compiled for 1.4.0, module version = 0.2.1
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 2.0
(II) LoadModule: "vesa"
(II) Loading /usr/local/lib/xorg/modules/drivers//vesa_drv.so
(II) Module vesa: vendor="X.Org Foundation"
compiled for 1.4.0, module version = 1.3.0
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 2.0
(II) LoadModule: "vga"
(II) Loading /usr/local/lib/xorg/modules/drivers//vga_drv.so
(II) Module vga: vendor="X.Org Foundation"
compiled for 1.4.0, module version = 4.1.0
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 2.0
(II) Addressable bus resource ranges are
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
[1] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) OS-reported resource ranges:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[5] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
(II) PCI Memory resource overlap reduced 0xf8000000 from 0xffffffff to 0xf7ffffff
(II) Active PCI resource ranges:
[0] -1 0 0xe8000000 - 0xefffffff (0x8000000) MX[B]E
[1] -1 0 0xe8122000 - 0xe8123fff (0x2000) MX[B]E
[2] -1 0 0xe8121000 - 0xe8121fff (0x1000) MX[B]E
[3] -1 0 0xe8100000 - 0xe81fffff (0x100000) MX[B]E
[4] -1 0 0xe8120000 - 0xe813ffff (0x20000) MX[B]E
[5] -1 0 0xf8000000 - 0xf7ffffff (0x0) MX[B]EO
[6] -1 0 0xf0000000 - 0xf7ffffff (0x8000000) MX[B](B)
[7] -1 0 0x00001860 - 0x0000187f (0x20) IX[B]E
[8] -1 0 0x00001850 - 0x0000185f (0x10) IX[B]E
[9] -1 0 0x00001840 - 0x0000187f (0x40) IX[B]E
[10] -1 0 0x00001800 - 0x000018ff (0x100) IX[B]E
(II) PCI Memory resource overlap reduced 0xe8000000 from 0xefffffff to 0xe80fffff
(II) PCI I/O resource overlap reduced 0x00001840 from 0x0000187f to 0x0000184f
(II) PCI Memory resource overlap reduced 0xe8100000 from 0xe81fffff to 0xe811ffff
(II) PCI I/O resource overlap reduced 0x00001800 from 0x000018ff to 0x0000183f
(II) PCI Memory resource overlap reduced 0xe8120000 from 0xe813ffff to 0xe8120fff
(II) Active PCI resource ranges after removing overlaps:
[0] -1 0 0xe8000000 - 0xe80fffff (0x100000) MX[B]E
[1] -1 0 0xe8122000 - 0xe8123fff (0x2000) MX[B]E
[2] -1 0 0xe8121000 - 0xe8121fff (0x1000) MX[B]E
[3] -1 0 0xe8100000 - 0xe811ffff (0x20000) MX[B]E
[4] -1 0 0xe8120000 - 0xe8120fff (0x1000) MX[B]E
[5] -1 0 0xf8000000 - 0xf7ffffff (0x0) MX[B]EO
[6] -1 0 0xf0000000 - 0xf7ffffff (0x8000000) MX[B](B)
[7] -1 0 0x00001860 - 0x0000187f (0x20) IX[B]E
[8] -1 0 0x00001850 - 0x0000185f (0x10) IX[B]E
[9] -1 0 0x00001840 - 0x0000184f (0x10) IX[B]E
[10] -1 0 0x00001800 - 0x0000183f (0x40) IX[B]E
(II) OS-reported resource ranges after removing overlaps with PCI:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[5] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
(II) All system resource ranges:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 0 0xe8000000 - 0xe80fffff (0x100000) MX[B]E
[5] -1 0 0xe8122000 - 0xe8123fff (0x2000) MX[B]E
[6] -1 0 0xe8121000 - 0xe8121fff (0x1000) MX[B]E
[7] -1 0 0xe8100000 - 0xe811ffff (0x20000) MX[B]E
[8] -1 0 0xe8120000 - 0xe8120fff (0x1000) MX[B]E
[9] -1 0 0xf8000000 - 0xf7ffffff (0x0) MX[B]EO
[10] -1 0 0xf0000000 - 0xf7ffffff (0x8000000) MX[B](B)
[11] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[12] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[13] -1 0 0x00001860 - 0x0000187f (0x20) IX[B]E
[14] -1 0 0x00001850 - 0x0000185f (0x10) IX[B]E
[15] -1 0 0x00001840 - 0x0000184f (0x10) IX[B]E
[16] -1 0 0x00001800 - 0x0000183f (0x40) IX[B]E
(II) Primary Device is: PCI 01:00:0
(II) VESA: driver for VESA chipsets: vesa
(II) VGA: Generic VGA driver (version 4.1) for chipsets: generic
(++) Using config file: "/root/xorg.conf.new"
(==) ServerLayout "X.org Configured"
(**) |-->Screen "Screen0" (0)
(**) | |-->Monitor "Monitor0"
(**) | |-->Device "Card0"
(**) |-->Input Device "Mouse0"
(**) |-->Input Device "Keyboard0"
(==) Automatically adding devices
(==) Automatically enabling devices
(==) Including the default font path /usr/local/lib/X11/fonts/misc/,/usr/local/lib/X11/fonts/TTF/,/usr/local/lib/X11/fonts/OTF,/usr/local/lib/X11/fonts/Type1/,/usr/local/lib/X11/fonts/100dpi/,/usr/local/lib/X11/fonts/75dpi/.
(**) FontPath set to:
/usr/local/lib/X11/fonts/misc/,
/usr/local/lib/X11/fonts/TTF/,
/usr/local/lib/X11/fonts/OTF,
/usr/local/lib/X11/fonts/Type1/,
/usr/local/lib/X11/fonts/100dpi/,
/usr/local/lib/X11/fonts/75dpi/,
/usr/local/lib/X11/fonts/misc/,
/usr/local/lib/X11/fonts/TTF/,
/usr/local/lib/X11/fonts/OTF,
/usr/local/lib/X11/fonts/Type1/,
/usr/local/lib/X11/fonts/100dpi/,
/usr/local/lib/X11/fonts/75dpi/
(**) RgbPath set to "/usr/local/share/X11/rgb"
(**) ModulePath set to "/usr/local/lib/xorg/modules"
(--) Chipset vesa found
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 0 0xe8000000 - 0xe80fffff (0x100000) MX[B]E
[5] -1 0 0xe8122000 - 0xe8123fff (0x2000) MX[B]E
[6] -1 0 0xe8121000 - 0xe8121fff (0x1000) MX[B]E
[7] -1 0 0xe8100000 - 0xe811ffff (0x20000) MX[B]E
[8] -1 0 0xe8120000 - 0xe8120fff (0x1000) MX[B]E
[9] -1 0 0xf8000000 - 0xf7ffffff (0x0) MX[B]EO
[10] -1 0 0xf0000000 - 0xf7ffffff (0x8000000) MX[B](B)
[11] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[12] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[13] -1 0 0x00001860 - 0x0000187f (0x20) IX[B]E
[14] -1 0 0x00001850 - 0x0000185f (0x10) IX[B]E
[15] -1 0 0x00001840 - 0x0000184f (0x10) IX[B]E
[16] -1 0 0x00001800 - 0x0000183f (0x40) IX[B]E
(II) resource ranges after probing:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 0 0xe8000000 - 0xe80fffff (0x100000) MX[B]E
[5] -1 0 0xe8122000 - 0xe8123fff (0x2000) MX[B]E
[6] -1 0 0xe8121000 - 0xe8121fff (0x1000) MX[B]E
[7] -1 0 0xe8100000 - 0xe811ffff (0x20000) MX[B]E
[8] -1 0 0xe8120000 - 0xe8120fff (0x1000) MX[B]E
[9] -1 0 0xf8000000 - 0xf7ffffff (0x0) MX[B]EO
[10] -1 0 0xf0000000 - 0xf7ffffff (0x8000000) MX[B](B)
[11] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B]
[12] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B]
[13] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B]
[14] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[15] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[16] -1 0 0x00001860 - 0x0000187f (0x20) IX[B]E
[17] -1 0 0x00001850 - 0x0000185f (0x10) IX[B]E
[18] -1 0 0x00001840 - 0x0000184f (0x10) IX[B]E
[19] -1 0 0x00001800 - 0x0000183f (0x40) IX[B]E
[20] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B]
[21] 0 0 0x000003c0 - 0x000003df (0x20) IS[B]
(II) Setting vga for screen 0.


Xorg detected your mouse at device /dev/sysmouse.
Please check your config if the mouse is still not
operational, as by default Xorg tries to autodetect
the protocol.

Your xorg.conf file is /root/xorg.conf.new

To test the server, run 'X -config /root/xorg.conf.new'

--------------------------------------------------
xorg.conf.new

Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection

Section "Files"
RgbPath "/usr/local/share/X11/rgb"
ModulePath "/usr/local/lib/xorg/modules"
FontPath "/usr/local/lib/X11/fonts/misc/"
FontPath "/usr/local/lib/X11/fonts/TTF/"
FontPath "/usr/local/lib/X11/fonts/OTF"
FontPath "/usr/local/lib/X11/fonts/Type1/"
FontPath "/usr/local/lib/X11/fonts/100dpi/"
FontPath "/usr/local/lib/X11/fonts/75dpi/"
EndSection

Section "Module"
Load "GLcore"
Load "dbe"
Load "dri"
Load "extmod"
Load "glx"
Load "record"
Load "xtrap"
Load "freetype"
Load "type1"
EndSection

Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
EndSection

Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/sysmouse"
Option "ZAxisMapping" "4 5 6 7"
EndSection

Section "Monitor"
Identifier "Monitor0"
VendorName "Monitor Vendor"
ModelName "Monitor Model"
EndSection

Section "Device"
### Available Driver options are:-
### Values: : integer, <f>: float, <bool>: "True"/"False",
### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
### [arg]: arg optional
#Option "ShadowFB" # [<bool>]
#Option "DefaultRefresh" # [<bool>]
#Option "ModeSetClearScreen" # [<bool>]
Identifier "Card0"
Driver "vesa"
VendorName "S3 Inc."
BoardName "86C270-294 Savage/IX-MV"
BusID "PCI:1:0:0"
EndSection

Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
SubSection "Display"
Viewport 0 0
Depth 1
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 4
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 8
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 15
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 16
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection


运行 X -config xrog.conf.new测试下显示效果，然后Ctrl+Alt+Backspace退出的时候就死机了，这样连Gnome都无法正常使用了，请帮忙解决！！

[dmlwbd]

哎，这么多天都没人帮忙！

[LaoLang_cool]

参考：
http://www.freebsdchina.org/forum/topic_40677_20.html

freebsd是有时出现奇怪的问题，我现在己经转到linux了。
这种原因，若不是很多人遇到，除非自己懂，不然等到不知什么时候才能有人帮忙。

[dmlwbd]

哎~~~是个难题

[macafee]

看样子是台老本本。可能和USB设备有关。

[dmlwbd]

[redv]

贴内核配置的时候，最好贴和你基于那个修改的文件的diff。

[dmlwbd]

哎，问题终于解决了！！！谢谢以上兄弟的帮助