| 阅读上一个主题 :: 阅读下一个主题 |
| 作者 |
留言 |
yes298
道童
注册时间: 2007-12-13
文章: 311
|
 发表于: Sat 2008-05-03 10:06:55 发表主题: [問題已自行解決] 奇怪的postfix问题 !!! !!!!!!!!!!!!! |
 |
|
奇怪的postfix问题 …
有一PHP程序是用PHP Mailer去传送电邮, 当使用tom.com的SMTP Relay传送出去,
在goole,yahoo,hotmail收到的电邮内容(HTML格式的,有table,css)是很正常的, 但同样的电邮,
改用公司自己的FreeBSD 7.0 Postfix v2.5.1 去传送, 则收的电邮内容出现如下几个奇怪的事:
(1) 某些字变为怪符号, 无法正常显示 …
(2) 电邮内容中的网站连结会自行增加某些内容:
如: http://www.abc.com 会变为 http://www.abc.%20com
(3) 电邮内容原本是靠左对齐, 却会无故变为置中对齐
(4) 同一段落的文字颜色, 有一半又会变为其他颜色 …
这是怎么回事呀, 请求各位大大帮助 ….
感谢万分 ….
_________________
熱心幫助他人, 即是幫助自己 ...
對新手, 盡可能去扶持一下, 又有何妨呢?
非常鄙視那些有點技術,就自以為是, 沾沾自喜的人, 不幫人也罷, 還出言諷刺新手, 別忘了, 你亦曾為新手 ...
最后进行编辑的是 yes298 on Mon 2008-05-05 18:47:16, 总计第 4 次编辑 |
|
| 返回页首 |
|
 |
delphij
精神病
注册时间: 2002-08-07
文章: 8427
来自: Mountain View, California
|
| 发表于: Sat 2008-05-03 11:53:56 发表主题: |
|
|
有可能你的mailer不能正确地拼信，postfix会做正规化处理。换一个别的mailer试试看（不要假定别人的MTA不会做正规化）。
_________________
BSD是独立的一蹴，我们有自己的圈子，我们不以商业驱动，追求完美是我们的源动力，任何不好的代码都不能在这里存活。 |
|
| 返回页首 |
|
|
yes298
道童
注册时间: 2007-12-13
文章: 311
|
| 发表于: Sat 2008-05-03 12:14:10 发表主题: |
|
|
老大, 谢谢你的回复...
但我尚不清楚你的意思, 你说的mailer是指那个php mailer嗎?
php程序用php mailer --> 通过Tom.com的SMTP Relay传送 --> 收到正常电邮
php程序用php mailer --> 通过我公司的postfix传送 --> 收到电邮出现怪现象 ...
老大, 问题是否出现在我公司的postfix设定呢?
有哪些设定或ports是关系到正确地拼信...
尚请老大指点一下小弟, 谢谢~
_________________
熱心幫助他人, 即是幫助自己 ...
對新手, 盡可能去扶持一下, 又有何妨呢?
非常鄙視那些有點技術,就自以為是, 沾沾自喜的人, 不幫人也罷, 還出言諷刺新手, 別忘了, 你亦曾為新手 ... |
|
| 返回页首 |
|
|
yes298
道童
注册时间: 2007-12-13
文章: 311
|
| 发表于: Sat 2008-05-03 17:13:17 发表主题: |
|
|
请delphij老大再指点一下 ..
感激萬分 ....
_________________
熱心幫助他人, 即是幫助自己 ...
對新手, 盡可能去扶持一下, 又有何妨呢?
非常鄙視那些有點技術,就自以為是, 沾沾自喜的人, 不幫人也罷, 還出言諷刺新手, 別忘了, 你亦曾為新手 ... |
|
| 返回页首 |
|
|
adamson
道士
注册时间: 2004-08-04
文章: 593
来自: Shenzhen
|
| 发表于: Sat 2008-05-03 21:16:35 发表主题: |
|
|
是不是启用了 content filtering? 贴 main.cf.
_________________
don't get mad, get bacula. |
|
| 返回页首 |
|
|
yes298
道童
注册时间: 2007-12-13
文章: 311
|
| 发表于: Sun 2008-05-04 07:13:16 发表主题: |
|
|
以下是main.cf配置文件, 请各位大大帮忙看看是什么问题,
已困扰我许久了, 感激不尽 ….
| 代码: | # Global Postfix configuration file. This file lists only a subset
# of all parameters. For the syntax, and for a complete parameter
# list, see the postconf(5) manual page (command: "man 5 postconf").
#
# For common configuration examples, see BASIC_CONFIGURATION_README
# and STANDARD_CONFIGURATION_README. To find these documents, use
# the command "postconf html_directory readme_directory", or go to
# http://www.postfix.org/.
#
# For best results, change no more than 2-3 parameters at a time,
# and test if Postfix still works after every change.
# SOFT BOUNCE
#
# The soft_bounce parameter provides a limited safety net for
# testing. When soft_bounce is enabled, mail will remain queued that
# would otherwise bounce. This parameter disables locally-generated
# bounces, and prevents the SMTP server from rejecting mail permanently
# (by changing 5xx replies into 4xx replies). However, soft_bounce
# is no cure for address rewriting mistakes or mail routing mistakes.
#
#soft_bounce = no
# LOCAL PATHNAME INFORMATION
#
# The queue_directory specifies the location of the Postfix queue.
# This is also the root directory of Postfix daemons that run chrooted.
# See the files in examples/chroot-setup for setting up Postfix chroot
# environments on different UNIX systems.
#
queue_directory = /var/spool/postfix
# The command_directory parameter specifies the location of all
# postXXX commands.
#
command_directory = /usr/local/sbin
# The daemon_directory parameter specifies the location of all Postfix
# daemon programs (i.e. programs listed in the master.cf file). This
# directory must be owned by root.
#
daemon_directory = /usr/local/libexec/postfix
# The data_directory parameter specifies the location of Postfix-writable
# data files (caches, random numbers). This directory must be owned
# by the mail_owner account (see below).
#
data_directory = /var/db/postfix
# QUEUE AND PROCESS OWNERSHIP
#
# The mail_owner parameter specifies the owner of the Postfix queue
# and of most Postfix daemon processes. Specify the name of a user
# account THAT DOES NOT SHARE ITS USER OR GROUP ID WITH OTHER ACCOUNTS
# AND THAT OWNS NO OTHER FILES OR PROCESSES ON THE SYSTEM. In
# particular, don't specify nobody or daemon. PLEASE USE A DEDICATED
# USER.
#
mail_owner = postfix
# The default_privs parameter specifies the default rights used by
# the local delivery agent for delivery to external file or command.
# These rights are used in the absence of a recipient user context.
# DO NOT SPECIFY A PRIVILEGED USER OR THE POSTFIX OWNER.
#
#default_privs = nobody
# INTERNET HOST AND DOMAIN NAMES
#
# The myhostname parameter specifies the internet hostname of this
# mail system. The default is to use the fully-qualified domain name
# from gethostname(). $myhostname is used as a default value for many
# other configuration parameters.
#
#myhostname = host.domain.tld
#myhostname = virtual.domain.tld
# The mydomain parameter specifies the local internet domain name.
# The default is to use $myhostname minus the first component.
# $mydomain is used as a default value for many other configuration
# parameters.
#
#mydomain = domain.tld
# SENDING MAIL
#
# The myorigin parameter specifies the domain that locally-posted
# mail appears to come from. The default is to append $myhostname,
# which is fine for small sites. If you run a domain with multiple
# machines, you should (1) change this to $mydomain and (2) set up
# a domain-wide alias database that aliases each user to
# user@that.users.mailhost.
#
# For the sake of consistency between sender and recipient addresses,
# myorigin also specifies the default domain name that is appended
# to recipient addresses that have no @domain part.
#
#myorigin = $myhostname
#myorigin = $mydomain
# RECEIVING MAIL
# The inet_interfaces parameter specifies the network interface
# addresses that this mail system receives mail on. By default,
# the software claims all active interfaces on the machine. The
# parameter also controls delivery of mail to user@[ip.address].
#
# See also the proxy_interfaces parameter, for network addresses that
# are forwarded to us via a proxy or network address translator.
#
# Note: you need to stop/start Postfix when this parameter changes.
#
#inet_interfaces = all
#inet_interfaces = $myhostname
#inet_interfaces = $myhostname, localhost
# The proxy_interfaces parameter specifies the network interface
# addresses that this mail system receives mail on by way of a
# proxy or network address translation unit. This setting extends
# the address list specified with the inet_interfaces parameter.
#
# You must specify your proxy/NAT addresses when your system is a
# backup MX host for other domains, otherwise mail delivery loops
# will happen when the primary MX host is down.
#
#proxy_interfaces =
#proxy_interfaces = 1.2.3.4
# The mydestination parameter specifies the list of domains that this
# machine considers itself the final destination for.
#
# These domains are routed to the delivery agent specified with the
# local_transport parameter setting. By default, that is the UNIX
# compatible delivery agent that lookups all recipients in /etc/passwd
# and /etc/aliases or their equivalent.
#
# The default is $myhostname + localhost.$mydomain. On a mail domain
# gateway, you should also include $mydomain.
#
# Do not specify the names of virtual domains - those domains are
# specified elsewhere (see VIRTUAL_README).
#
# Do not specify the names of domains that this machine is backup MX
# host for. Specify those names via the relay_domains settings for
# the SMTP server, or use permit_mx_backup if you are lazy (see
# STANDARD_CONFIGURATION_README).
#
# The local machine is always the final destination for mail addressed
# to user@[the.net.work.address] of an interface that the mail system
# receives mail on (see the inet_interfaces parameter).
#
# Specify a list of host or domain names, /file/name or type:table
# patterns, separated by commas and/or whitespace. A /file/name
# pattern is replaced by its contents; a type:table is matched when
# a name matches a lookup key (the right-hand side is ignored).
# Continue long lines by starting the next line with whitespace.
#
# See also below, section "REJECTING MAIL FOR UNKNOWN LOCAL USERS".
#
#mydestination = $myhostname, localhost.$mydomain, localhost
#mydestination = $myhostname, localhost.$mydomain, localhost, $mydomain
#mydestination = $myhostname, localhost.$mydomain, localhost, $mydomain,
# mail.$mydomain, www.$mydomain, ftp.$mydomain
# REJECTING MAIL FOR UNKNOWN LOCAL USERS
#
# The local_recipient_maps parameter specifies optional lookup tables
# with all names or addresses of users that are local with respect
# to $mydestination, $inet_interfaces or $proxy_interfaces.
#
# If this parameter is defined, then the SMTP server will reject
# mail for unknown local users. This parameter is defined by default.
#
# To turn off local recipient checking in the SMTP server, specify
# local_recipient_maps = (i.e. empty).
#
# The default setting assumes that you use the default Postfix local
# delivery agent for local delivery. You need to update the
# local_recipient_maps setting if:
#
# - You define $mydestination domain recipients in files other than
# /etc/passwd, /etc/aliases, or the $virtual_alias_maps files.
# For example, you define $mydestination domain recipients in
# the $virtual_mailbox_maps files.
#
# - You redefine the local delivery agent in master.cf.
#
# - You redefine the "local_transport" setting in main.cf.
#
# - You use the "luser_relay", "mailbox_transport", or "fallback_transport"
# feature of the Postfix local delivery agent (see local(8)).
#
# Details are described in the LOCAL_RECIPIENT_README file.
#
# Beware: if the Postfix SMTP server runs chrooted, you probably have
# to access the passwd file via the proxymap service, in order to
# overcome chroot restrictions. The alternative, having a copy of
# the system passwd file in the chroot jail is just not practical.
#
# The right-hand side of the lookup tables is conveniently ignored.
# In the left-hand side, specify a bare username, an @domain.tld
# wild-card, or specify a user@domain.tld address.
#
#local_recipient_maps = unix:passwd.byname $alias_maps
#local_recipient_maps = proxy:unix:passwd.byname $alias_maps
#local_recipient_maps =
# The unknown_local_recipient_reject_code specifies the SMTP server
# response code when a recipient domain matches $mydestination or
# ${proxy,inet}_interfaces, while $local_recipient_maps is non-empty
# and the recipient address or address local-part is not found.
#
# The default setting is 550 (reject mail) but it is safer to start
# with 450 (try again later) until you are certain that your
# local_recipient_maps settings are OK.
#
unknown_local_recipient_reject_code = 550
# TRUST AND RELAY CONTROL
# The mynetworks parameter specifies the list of "trusted" SMTP
# clients that have more privileges than "strangers".
#
# In particular, "trusted" SMTP clients are allowed to relay mail
# through Postfix. See the smtpd_recipient_restrictions parameter
# in postconf(5).
#
# You can specify the list of "trusted" network addresses by hand
# or you can let Postfix do it for you (which is the default).
#
# By default (mynetworks_style = subnet), Postfix "trusts" SMTP
# clients in the same IP subnetworks as the local machine.
# On Linux, this does works correctly only with interfaces specified
# with the "ifconfig" command.
#
# Specify "mynetworks_style = class" when Postfix should "trust" SMTP
# clients in the same IP class A/B/C networks as the local machine.
# Don't do this with a dialup site - it would cause Postfix to "trust"
# your entire provider's network. Instead, specify an explicit
# mynetworks list by hand, as described below.
#
# Specify "mynetworks_style = host" when Postfix should "trust"
# only the local machine.
#
#mynetworks_style = class
#mynetworks_style = subnet
mynetworks_style = host
# Alternatively, you can specify the mynetworks list by hand, in
# which case Postfix ignores the mynetworks_style setting.
#
# Specify an explicit list of network/netmask patterns, where the
# mask specifies the number of bits in the network part of a host
# address.
#
# You can also specify the absolute pathname of a pattern file instead
# of listing the patterns here. Specify type:table for table-based lookups
# (the value on the table right-hand side is not used).
#
#mynetworks = 168.100.189.0/28, 127.0.0.0/8
#mynetworks = $config_directory/mynetworks
#mynetworks = hash:/usr/local/etc/postfix/network_table
# The relay_domains parameter restricts what destinations this system will
# relay mail to. See the smtpd_recipient_restrictions description in
# postconf(5) for detailed information.
#
# By default, Postfix relays mail
# - from "trusted" clients (IP address matches $mynetworks) to any destination,
# - from "untrusted" clients to destinations that match $relay_domains or
# subdomains thereof, except addresses with sender-specified routing.
# The default relay_domains value is $mydestination.
#
# In addition to the above, the Postfix SMTP server by default accepts mail
# that Postfix is final destination for:
# - destinations that match $inet_interfaces or $proxy_interfaces,
# - destinations that match $mydestination
# - destinations that match $virtual_alias_domains,
# - destinations that match $virtual_mailbox_domains.
# These destinations do not need to be listed in $relay_domains.
#
# Specify a list of hosts or domains, /file/name patterns or type:name
# lookup tables, separated by commas and/or whitespace. Continue
# long lines by starting the next line with whitespace. A file name
# is replaced by its contents; a type:name table is matched when a
# (parent) domain appears as lookup key.
#
# NOTE: Postfix will not automatically forward mail for domains that
# list this system as their primary or backup MX host. See the
# permit_mx_backup restriction description in postconf(5).
#
#relay_domains = $mydestination
# INTERNET OR INTRANET
# The relayhost parameter specifies the default host to send mail to
# when no entry is matched in the optional transport(5) table. When
# no relayhost is given, mail is routed directly to the destination.
#
# On an intranet, specify the organizational domain name. If your
# internal DNS uses no MX records, specify the name of the intranet
# gateway host instead.
#
# In the case of SMTP, specify a domain, host, host:port, [host]:port,
# [address] or [address]:port; the form [host] turns off MX lookups.
#
# If you're connected via UUCP, see also the default_transport parameter.
#
#relayhost = $mydomain
#relayhost = [gateway.my.domain]
#relayhost = [mailserver.isp.tld]
#relayhost = uucphost
#relayhost = [an.ip.add.ress]
# REJECTING UNKNOWN RELAY USERS
#
# The relay_recipient_maps parameter specifies optional lookup tables
# with all addresses in the domains that match $relay_domains.
#
# If this parameter is defined, then the SMTP server will reject
# mail for unknown relay users. This feature is off by default.
#
# The right-hand side of the lookup tables is conveniently ignored.
# In the left-hand side, specify an @domain.tld wild-card, or specify
# a user@domain.tld address.
#
#relay_recipient_maps = hash:/usr/local/etc/postfix/relay_recipients
# INPUT RATE CONTROL
#
# The in_flow_delay configuration parameter implements mail input
# flow control. This feature is turned on by default, although it
# still needs further development (it's disabled on SCO UNIX due
# to an SCO bug).
#
# A Postfix process will pause for $in_flow_delay seconds before
# accepting a new message, when the message arrival rate exceeds the
# message delivery rate. With the default 100 SMTP server process
# limit, this limits the mail inflow to 100 messages a second more
# than the number of messages delivered per second.
#
# Specify 0 to disable the feature. Valid delays are 0..10.
#
#in_flow_delay = 1s
# ADDRESS REWRITING
#
# The ADDRESS_REWRITING_README document gives information about
# address masquerading or other forms of address rewriting including
# username->Firstname.Lastname mapping.
# ADDRESS REDIRECTION (VIRTUAL DOMAIN)
#
# The VIRTUAL_README document gives information about the many forms
# of domain hosting that Postfix supports.
# "USER HAS MOVED" BOUNCE MESSAGES
#
# See the discussion in the ADDRESS_REWRITING_README document.
# TRANSPORT MAP
#
# See the discussion in the ADDRESS_REWRITING_README document.
# ALIAS DATABASE
#
# The alias_maps parameter specifies the list of alias databases used
# by the local delivery agent. The default list is system dependent.
#
# On systems with NIS, the default is to search the local alias
# database, then the NIS alias database. See aliases(5) for syntax
# details.
#
# If you change the alias database, run "postalias /etc/aliases" (or
# wherever your system stores the mail alias file), or simply run
# "newaliases" to build the necessary DBM or DB file.
#
# It will take a minute or so before changes become visible. Use
# "postfix reload" to eliminate the delay.
#
#alias_maps = dbm:/etc/aliases
#alias_maps = hash:/etc/aliases
#alias_maps = hash:/etc/aliases, nis:mail.aliases
#alias_maps = netinfo:/aliases
# The alias_database parameter specifies the alias database(s) that
# are built with "newaliases" or "sendmail -bi". This is a separate
# configuration parameter, because alias_maps (see above) may specify
# tables that are not necessarily all under control by Postfix.
#
#alias_database = dbm:/etc/aliases
#alias_database = dbm:/etc/mail/aliases
#alias_database = hash:/etc/aliases
#alias_database = hash:/etc/aliases, hash:/opt/majordomo/aliases
# ADDRESS EXTENSIONS (e.g., user+foo)
#
# The recipient_delimiter parameter specifies the separator between
# user names and address extensions (user+foo). See canonical(5),
# local(8), relocated(5) and virtual(5) for the effects this has on
# aliases, canonical, virtual, relocated and .forward file lookups.
# Basically, the software tries user+foo and .forward+foo before
# trying user and .forward.
#
#recipient_delimiter = +
# DELIVERY TO MAILBOX
#
# The home_mailbox parameter specifies the optional pathname of a
# mailbox file relative to a user's home directory. The default
# mailbox file is /var/spool/mail/user or /var/mail/user. Specify
# "Maildir/" for qmail-style delivery (the / is required).
#
#home_mailbox = Mailbox
#home_mailbox = Maildir/
# The mail_spool_directory parameter specifies the directory where
# UNIX-style mailboxes are kept. The default setting depends on the
# system type.
#
#mail_spool_directory = /var/mail
#mail_spool_directory = /var/spool/mail
# The mailbox_command parameter specifies the optional external
# command to use instead of mailbox delivery. The command is run as
# the recipient with proper HOME, SHELL and LOGNAME environment settings.
# Exception: delivery for root is done as $default_user.
#
# Other environment variables of interest: USER (recipient username),
# EXTENSION (address extension), DOMAIN (domain part of address),
# and LOCAL (the address localpart).
#
# Unlike other Postfix configuration parameters, the mailbox_command
# parameter is not subjected to $parameter substitutions. This is to
# make it easier to specify shell syntax (see example below).
#
# Avoid shell meta characters because they will force Postfix to run
# an expensive shell process. Procmail alone is expensive enough.
#
# IF YOU USE THIS TO DELIVER MAIL SYSTEM-WIDE, YOU MUST SET UP AN
# ALIAS THAT FORWARDS MAIL FOR ROOT TO A REAL USER.
#
#mailbox_command = /some/where/procmail
#mailbox_command = /some/where/procmail -a "$EXTENSION"
# The mailbox_transport specifies the optional transport in master.cf
# to use after processing aliases and .forward files. This parameter
# has precedence over the mailbox_command, fallback_transport and
# luser_relay parameters.
#
# Specify a string of the form transport:nexthop, where transport is
# the name of a mail delivery transport defined in master.cf. The
# :nexthop part is optional. For more details see the sample transport
# configuration file.
#
# NOTE: if you use this feature for accounts not in the UNIX password
# file, then you must update the "local_recipient_maps" setting in
# the main.cf file, otherwise the SMTP server will reject mail for
# non-UNIX accounts with "User unknown in local recipient table".
#
#mailbox_transport = lmtp:unix:/file/name
#mailbox_transport = cyrus
# The fallback_transport specifies the optional transport in master.cf
# to use for recipients that are not found in the UNIX passwd database.
# This parameter has precedence over the luser_relay parameter.
#
# Specify a string of the form transport:nexthop, where transport is
# the name of a mail delivery transport defined in master.cf. The
# :nexthop part is optional. For more details see the sample transport
# configuration file.
#
# NOTE: if you use this feature for accounts not in the UNIX password
# file, then you must update the "local_recipient_maps" setting in
# the main.cf file, otherwise the SMTP server will reject mail for
# non-UNIX accounts with "User unknown in local recipient table".
#
#fallback_transport = lmtp:unix:/file/name
#fallback_transport = cyrus
#fallback_transport =
# The luser_relay parameter specifies an optional destination address
# for unknown recipients. By default, mail for unknown@$mydestination,
# unknown@[$inet_interfaces] or unknown@[$proxy_interfaces] is returned
# as undeliverable.
#
# The following expansions are done on luser_relay: $user (recipient
# username), $shell (recipient shell), $home (recipient home directory),
# $recipient (full recipient address), $extension (recipient address
# extension), $domain (recipient domain), $local (entire recipient
# localpart), $recipient_delimiter. Specify ${name?value} or
# ${name:value} to expand value only when $name does (does not) exist.
#
# luser_relay works only for the default Postfix local delivery agent.
#
# NOTE: if you use this feature for accounts not in the UNIX password
# file, then you must specify "local_recipient_maps =" (i.e. empty) in
# the main.cf file, otherwise the SMTP server will reject mail for
# non-UNIX accounts with "User unknown in local recipient table".
#
#luser_relay = $user@other.host
#luser_relay = $local@other.host
#luser_relay = admin+$local
# JUNK MAIL CONTROLS
#
# The controls listed here are only a very small subset. The file
# SMTPD_ACCESS_README provides an overview.
# The header_checks parameter specifies an optional table with patterns
# that each logical message header is matched against, including
# headers that span multiple physical lines.
#
# By default, these patterns also apply to MIME headers and to the
# headers of attached messages. With older Postfix versions, MIME and
# attached message headers were treated as body text.
#
# For details, see "man header_checks".
#
header_checks = regexp:/usr/local/etc/postfix/header_checks
# FAST ETRN SERVICE
#
# Postfix maintains per-destination logfiles with information about
# deferred mail, so that mail can be flushed quickly with the SMTP
# "ETRN domain.tld" command, or by executing "sendmail -qRdomain.tld".
# See the ETRN_README document for a detailed description.
#
# The fast_flush_domains parameter controls what destinations are
# eligible for this service. By default, they are all domains that
# this server is willing to relay mail to.
#
#fast_flush_domains = $relay_domains
# SHOW SOFTWARE VERSION OR NOT
#
# The smtpd_banner parameter specifies the text that follows the 220
# code in the SMTP server's greeting banner. Some people like to see
# the mail version advertised. By default, Postfix shows no version.
#
# You MUST specify $myhostname at the start of the text. That is an
# RFC requirement. Postfix itself does not care.
#
#smtpd_banner = $myhostname ESMTP $mail_name
#smtpd_banner = $myhostname ESMTP $mail_name ($mail_version)
# PARALLEL DELIVERY TO THE SAME DESTINATION
#
# How many parallel deliveries to the same user or domain? With local
# delivery, it does not make sense to do massively parallel delivery
# to the same user, because mailbox updates must happen sequentially,
# and expensive pipelines in .forward files can cause disasters when
# too many are run at the same time. With SMTP deliveries, 10
# simultaneous connections to the same domain could be sufficient to
# raise eyebrows.
#
# Each message delivery transport has its XXX_destination_concurrency_limit
# parameter. The default is $default_destination_concurrency_limit for
# most delivery transports. For the local delivery agent the default is 2.
#local_destination_concurrency_limit = 2
#default_destination_concurrency_limit = 20
# DEBUGGING CONTROL
#
# The debug_peer_level parameter specifies the increment in verbose
# logging level when an SMTP client or server host name or address
# matches a pattern in the debug_peer_list parameter.
#
debug_peer_level = 2
# The debug_peer_list parameter specifies an optional list of domain
# or network patterns, /file/name patterns or type:name tables. When
# an SMTP client or server host name or address matches a pattern,
# increase the verbose logging level by the amount specified in the
# debug_peer_level parameter.
#
#debug_peer_list = 127.0.0.1
#debug_peer_list = some.domain
# The debugger_command specifies the external command that is executed
# when a Postfix daemon program is run with the -D option.
#
# Use "command .. & sleep 5" so that the debugger can attach before
# the process marches on. If you use an X-based debugger, be sure to
# set up your XAUTHORITY environment variable before starting Postfix.
#
debugger_command =
PATH=/bin:/usr/bin:/usr/local/bin:/usr/X11R6/bin
ddd $daemon_directory/$process_name $process_id & sleep 5
# If you can't use X, use this to capture the call stack when a
# daemon crashes. The result is in a file in the configuration
# directory, and is named after the process name and the process ID.
#
# debugger_command =
# PATH=/bin:/usr/bin:/usr/local/bin; export PATH; (echo cont;
# echo where) | gdb $daemon_directory/$process_name $process_id 2>&1
# >$config_directory/$process_name.$process_id.log & sleep 5
#
# Another possibility is to run gdb under a detached screen session.
# To attach to the screen sesssion, su root and run "screen -r
# <id_string>" where <id_string> uniquely matches one of the detached
# sessions (from "screen -list").
#
# debugger_command =
# PATH=/bin:/usr/bin:/sbin:/usr/sbin; export PATH; screen
# -dmS $process_name gdb $daemon_directory/$process_name
# $process_id & sleep 1
# INSTALL-TIME CONFIGURATION INFORMATION
#
# The following parameters are used when installing a new Postfix version.
#
# sendmail_path: The full pathname of the Postfix sendmail command.
# This is the Sendmail-compatible mail posting interface.
#
sendmail_path = /usr/local/sbin/sendmail
# newaliases_path: The full pathname of the Postfix newaliases command.
# This is the Sendmail-compatible command to build alias databases.
#
newaliases_path = /usr/local/bin/newaliases
# mailq_path: The full pathname of the Postfix mailq command. This
# is the Sendmail-compatible mail queue listing command.
#
mailq_path = /usr/local/bin/mailq
# setgid_group: The group for mail submission and queue management
# commands. This must be a group name with a numerical group ID that
# is not shared with other accounts, not even with the Postfix account.
#
setgid_group = maildrop
# html_directory: The location of the Postfix HTML documentation.
#
html_directory = no
# manpage_directory: The location of the Postfix on-line manual pages.
#
manpage_directory = /usr/local/man
# sample_directory: The location of the Postfix sample configuration files.
# This parameter is obsolete as of Postfix 2.1.
#
sample_directory = /usr/local/etc/postfix
# readme_directory: The location of the Postfix README files.
#
readme_directory = no
alias_maps=hash:/usr/local/etc/postfix/aliases
alias_database = hash:/usr/local/etc/postfix/aliases
myhostname = mail.sampleTest.com
mydomain = sampleTest.com
myorigin = $mydomain
mydestination = $myhostname
mynetworks = 127.0.0.0/8
inet_inetfaces=all
home_mailbox = Maildir/
default_privs=nobody
disable_vrfy_command = yes
mailbox_size_limit = 107374182400
message_size_limit = 12582912
virtual_minimum_uid = 125
virtual_uid_maps = static:125
virtual_gid_maps = static:125
virtual_alias_maps = hash:/usr/local/etc/postfix/virtual
virtual_mailbox_domains = $mydomain
virtual_mailbox_base = /var/mail
virtual_mailbox_maps = hash:/usr/local/etc/postfix/vmailbox
virtual_mailbox_limit = 107374182400
virtual_mailbox_limit_override = yes
virtual_mailbox_extended = yes
virtual_create_maildirsize = yes
virtual_overquota_bounce = yes
allow_mail_to_commands = alias,forward,include
allow_mail_to_files = alias,forward,include
header_checks = regexp:/usr/local/etc/postfix/header_checks
default_process_limit = 30000
local_destination_concurrency_limit = 30000
default_destination_concurrency_limit = 30000
smtpd_client_restrictions = permit_mynetworks,permit_sasl_authenticated
smtpd_helo_restrictions = reject_invalid_hostname,permit_mynetworks
smtpd_sender_restrictions = permit_mynetworks,permit_sasl_authenticated,reject_unknown_sender_domain,reject_unknown_client,reject_non_fqdn_sender
smtpd_recipient_restrictions = permit_mynetworks,permit_sasl_authenticated,permit_auth_destination,reject_unauth_destination,reject_non_fqdn_recipient,reject_invalid_hostname,reject_non_fqdn_hostname,reject_non_fqdn_sender,reject_unknown_sender_domain,reject_unknown_recipient_domain,reject_unauth_pipelining,check_relay_domains,reject
smtpd_data_restrictions = reject_unauth_pipelining
smtpd_sasl_security_options = noanonymous
smtpd_sasl_auth_enable = yes
smtpd_sasl_path = smtpd
smtpd_sasl_type = cyrus
smtpd_sasl_local_domain = $myhostname
smtpd_sasl_authenticated_header = yes
smtpd_helo_required=yes
smtpd_delay_reject=yes
smtpd_client_connection_count_limit = 100000
smtpd_timeout = 30s
smtpd_banner=$myhostname ESMTP "Version not Available"
smtp_host_lookup = native,dns
smtp_use_tls = yes
smtp_tls_scert_verifydepth = 2
smtp_tls_note_starttls_offer = yes
smtpd_tls_security_level = may
smtpd_tls_key_file = /usr/local/etc/postfix/server.pem
smtpd_tls_cert_file = /usr/local/etc/postfix/server.pem
smtpd_tls_CAfile = /usr/local/etc/postfix/server.pem
smtpd_tls_loglevel = 1
smtpd_tls_received_header = yes
smtpd_tls_session_cache_timeout = 3600s
broken_sasl_auth_clients = yes
tls_random_source = dev:/dev/urandom |
_________________
熱心幫助他人, 即是幫助自己 ...
對新手, 盡可能去扶持一下, 又有何妨呢?
非常鄙視那些有點技術,就自以為是, 沾沾自喜的人, 不幫人也罷, 還出言諷刺新手, 別忘了, 你亦曾為新手 ... |
|
| 返回页首 |
|
|
adamson
道士
注册时间: 2004-08-04
文章: 593
来自: Shenzhen
|
| 发表于: Sun 2008-05-04 09:40:01 发表主题: |
|
|
| 代码: |
header_checks = regexp:/usr/local/etc/postfix/header_checks
|
贴 header_checks, 是 regexp? pcre?
_________________
don't get mad, get bacula. |
|
| 返回页首 |
|
|
yes298
道童
注册时间: 2007-12-13
文章: 311
|
| 发表于: Sun 2008-05-04 14:47:29 发表主题: |
|
|
大大, 我只在/usr/local/etc/postfix/header_checks 加了以下设定, 是哪项会导致出现这种怪现象, 请指点一下小弟, 谢谢~
| 代码: | /^Received:/ HOLD
/filename\=\".*src\.exe/ REJECT Virus filename is unavailable header
/filename\=\".*\.cpl\"/ REJECT Virus filename is unavailable header
/name\=\".*\.bat\"/ REJECT Virus filename is unavailable header
/name\=\".*\.scr/ REJECT Virus filename is unavailable header
/^Subject:.*W32.*removal\ tools$/ DISCARD Virus drop the unavailable header
/^From:.*sex\.com\.net/ DISCARD Commercial unavailable header
/^From:.*\@sex\.net\.com/ DISCARD Commercial unavailable header
/^To:.*\.TXT@/ DISCARD Commercial unavailable header
/^X-Spam-Status:/ Yes |
_________________
熱心幫助他人, 即是幫助自己 ...
對新手, 盡可能去扶持一下, 又有何妨呢?
非常鄙視那些有點技術,就自以為是, 沾沾自喜的人, 不幫人也罷, 還出言諷刺新手, 別忘了, 你亦曾為新手 ... |
|
| 返回页首 |
|
|
delphij
精神病
注册时间: 2002-08-07
文章: 8427
来自: Mountain View, California
|
| 发表于: Sun 2008-05-04 15:40:59 发表主题: |
|
|
你的mailer程序不能够生成正确的信体，这件事原本就应该预期出问题……不要因为有一两家邮件系统假装没看见有问题而认为自己没问题，这么做太Foxmail了。
_________________
BSD是独立的一蹴，我们有自己的圈子，我们不以商业驱动，追求完美是我们的源动力，任何不好的代码都不能在这里存活。 |
|
| 返回页首 |
|
|
adamson
道士
注册时间: 2004-08-04
文章: 593
来自: Shenzhen
|
| 发表于: Sun 2008-05-04 15:49:23 发表主题: |
|
|
注释掉 header_checks = regexp:/usr/local/etc/postfix/header_checks 测试一下? 我之前遇过类似的情况，是因为不正确使用了 amavisd 造成的。
另外，你这样的 main.cf，估计会收到不少的垃圾邮件。
_________________
don't get mad, get bacula. |
|
| 返回页首 |
|
|
yes298
道童
注册时间: 2007-12-13
文章: 311
|
| 发表于: Sun 2008-05-04 17:54:52 发表主题: |
|
|
已试过去掉
header_checks = regexp:/usr/local/etc/postfix/header_checks
这样的话, 收到的信就完全没有任何内容 …
而且/usr/local/etc/postfix/header_checks至少需要有以下2项才不会收到无内容的电邮…
| 代码: | /^Received:/ HOLD
/^X-Spam-Status:/ Yes |
楼上的兄弟, 你以前是如何解决问题, 尚请指点一下小弟, 已被此问题烦了好几天了….
Delphij老大, 你为何这么肯定是php mailer出问题, 我己在网上找了许久, 没有人说php mailer有这样的问题呀 …
php程序用php mailer --> 通过Tom.com的SMTP Relay传送 --> 收到正常电邮
php程序用php mailer --> 通过我公司的postfix传送 --> 收到电邮出现怪现象 ...
php程序用php mailer --> 通过我公司的postfix传送至Tom.com信箱 收到电邮亦出现怪现象 ...
应该是我的poxtfix设定有问题吧 ….
在postfix mail server上还安装了clamav, SpamAssassin, MailScanner …
这么有哪些会有可能导致这些问题, 请指点一下, 谢谢…
感激不尽 …
_________________
熱心幫助他人, 即是幫助自己 ...
對新手, 盡可能去扶持一下, 又有何妨呢?
非常鄙視那些有點技術,就自以為是, 沾沾自喜的人, 不幫人也罷, 還出言諷刺新手, 別忘了, 你亦曾為新手 ... |
|
| 返回页首 |
|
|
adamson
道士
注册时间: 2004-08-04
文章: 593
来自: Shenzhen
|
| 发表于: Sun 2008-05-04 23:13:52 发表主题: |
|
|
| 代码: |
已试过去掉
header_checks = regexp:/usr/local/etc/postfix/header_checks
这样的话, 收到的信就完全没有任何内容 …
而且/usr/local/etc/postfix/header_checks至少需要有以下2项才不会收到无内容的电邮…
代码:
/^Received:/ HOLD
/^X-Spam-Status:/ Yes
|
看不懂。我的意思是将 header_checks = regexp:/usr/local/etc/postfix/header_checks 这一行删除后测试。
| 代码: |
在postfix mail server上还安装了clamav, SpamAssassin, MailScanner
|
你贴的 main.cf 完整吗？
_________________
don't get mad, get bacula. |
|
| 返回页首 |
|
|
yes298
道童
注册时间: 2007-12-13
文章: 311
|
| 发表于: Mon 2008-05-05 08:17:46 发表主题: |
|
|
没错, 已将
header_checks = regexp:/usr/local/etc/postfix/header_checks
这一行删除后测试。
这样的话, 收到的信就完全没有任何内容 …
我贴的是完整的 main.cf
adamson兄, 请指点一下, 感谢不尽
_________________
熱心幫助他人, 即是幫助自己 ...
對新手, 盡可能去扶持一下, 又有何妨呢?
非常鄙視那些有點技術,就自以為是, 沾沾自喜的人, 不幫人也罷, 還出言諷刺新手, 別忘了, 你亦曾為新手 ... |
|
| 返回页首 |
|
|
kenbaby
道童
注册时间: 2005-03-19
文章: 262
|
| 发表于: Mon 2008-05-05 09:24:32 发表主题: |
|
|
没/usr/ports/converters/p5-MIME-Base64/ 的话，postfix就是会乱拼URL，sendmail就不会
_________________
是男人就用8.0-CURRENT！ |
|
| 返回页首 |
|
|
yes298
道童
注册时间: 2007-12-13
文章: 311
|
| 发表于: Mon 2008-05-05 10:09:59 发表主题: |
|
|
和这个有关系吗?
_________________
熱心幫助他人, 即是幫助自己 ...
對新手, 盡可能去扶持一下, 又有何妨呢?
非常鄙視那些有點技術,就自以為是, 沾沾自喜的人, 不幫人也罷, 還出言諷刺新手, 別忘了, 你亦曾為新手 ... |
|
| 返回页首 |
|
|
adamson
道士
注册时间: 2004-08-04
文章: 593
来自: Shenzhen
|
| 发表于: Mon 2008-05-05 10:11:54 发表主题: |
|
|
我将
| 代码: |
#header_checks = pcre:/usr/local/etc/postfix/header_checks
#body_checks = pcre:/usr/local/etc/postfix/body_checks
#mime_header_checks = pcre:/usr/local/etc/postfix/mime_header_checks
|
注释掉，然后 postfix reload 测试收发邮件，收到的邮件一切正常，没有看到你所说的 header_checks 神奇的作用。你的 postfix 安装是不是哪里有问题？
_________________
don't get mad, get bacula. |
|
| 返回页首 |
|
|
yes298
道童
注册时间: 2007-12-13
文章: 311
|
| 发表于: Mon 2008-05-05 11:07:24 发表主题: |
|
|
以下是我的全部安装过程, 我亦不知错在哪里, 尚请指点一下, 谢谢…
另外, 如我上面的贴图, MIME有重复的PORT, 不知会否有关呀?
| 代码: | 安装sasl2 (选择除PGSQL,SQLITE之外全选)
cd /usr/ports/security/cyrus-sasl2 && make WITH_AUTHDAEMON=yes FORCE_PKG_REGISTER="yes" install clean
安装openldap server: (选项包括:SASL,TCP_WRAPPERS,BDB,DYNAMIC_BACKENDS,SLUPD)
cd /usr/ports/net/openldap23-server && make FORCE_PKG_REGISTER="yes" install clean
安装cyrus-sasl2-saslauthd (选择BDB,如之前有安装openldap, 亦可选上) : cd /usr/ports/security/cyrus-sasl2-saslauthd && make install clean
安装Postfix:
cd /usr/ports/mail/postfix/ && make install FORCE_PKG_REGISTER="yes" clean (选择安装PCRE,SASL2,TLS,DBD,mySQL,OpenLDAP,VDA)
安装courier-imap (选择安装auth_userdb): cd /usr/ports/mail/courier-imap/ && make install clean
vi /usr/local/etc/postfix/vmailbox ( 此檔不存在的, 需自创. 加入虚拟信箱, 必须用指令 postmap /usr/local/etc/postfix/vmailbox 令其生效)
service@sampleTest.com sampleTest.com/service/
vi /usr/local/etc/postfix/virtual (必须用指令 postmap /usr/local/etc/postfix/virtual 令其生效)
service@sampleTest.com service
vi /usr/local/lib/sasl2/smtpd.conf (这是SMTP Auth的方法, 此檔不存在的, 需自创)
pwcheck_method: auxprop
auxprop_plugin: sasldb
mech_list: PLAIN LOGIN
vi /usr/local/etc/authlib/authdaemonrc (POP3验证密码)
authmodulelist="authuserdb"
authmodulelistorig="authuserdb"
vi /usr/local/etc/postfix/main.cf (修改完重启用: /usr/local/etc/rc.d/postfix restart)
alias_maps=hash:/usr/local/etc/postfix/aliases
alias_database = hash:/usr/local/etc/postfix/aliases
myhostname = dl.sampleTest.com
mydomain = sampleTest.com
myorigin = $mydomain
mydestination = $myhostname
mynetworks = 127.0.0.0/8
inet_inetfaces=all
home_mailbox = Maildir/
default_privs=nobody
disable_vrfy_command = yes
mailbox_size_limit = 10737418240
message_size_limit = 12582912
virtual_minimum_uid = 125
virtual_uid_maps = static:125
virtual_gid_maps = static:125
virtual_alias_maps = hash:/usr/local/etc/postfix/virtual
virtual_mailbox_domains = $mydomain
virtual_mailbox_base = /var/mail
virtual_mailbox_maps = hash:/usr/local/etc/postfix/vmailbox
virtual_mailbox_limit = 107374182400
virtual_mailbox_limit_override = yes
virtual_mailbox_extended = yes
virtual_create_maildirsize = yes
virtual_overquota_bounce = yes
allow_mail_to_commands = alias,forward,include
allow_mail_to_files = alias,forward,include
header_checks = regexp:/usr/local/etc/postfix/header_checks
default_process_limit = 30000
local_destination_concurrency_limit = 30000
default_destination_concurrency_limit = 30000
smtpd_client_restrictions = permit_mynetworks,permit_sasl_authenticated
smtpd_helo_restrictions = reject_invalid_hostname,permit_mynetworks
smtpd_sender_restrictions = permit_mynetworks,permit_sasl_authenticated,reject_unknown_sender_domain,reject_unknown_client,reject_non_fqdn_sender
smtpd_recipient_restrictions = permit_mynetworks,permit_sasl_authenticated,permit_auth_destination,reject_unauth_destination,reject_non_fqdn_recipient,reject_invalid_hostname,reject_non_fqdn_hostname,reject_non_fqdn_sender,reject_unknown_sender_domain,reject_unknown_recipient_domain,reject_unauth_pipelining,check_relay_domains,reject
smtpd_data_restrictions = reject_unauth_pipelining
smtpd_sasl_security_options = noanonymous
smtpd_sasl_auth_enable = yes
smtpd_sasl_path = smtpd
smtpd_sasl_type = cyrus
smtpd_sasl_local_domain = $myhostname
smtpd_sasl_authenticated_header = yes
smtpd_helo_required=yes
smtpd_delay_reject=yes
smtpd_client_connection_count_limit = 100000
smtpd_timeout = 30s
smtpd_banner=$myhostname ESMTP "Version not Available"
smtp_host_lookup = native,dns
smtp_use_tls = yes
smtp_tls_scert_verifydepth = 2
smtp_tls_note_starttls_offer = yes
smtpd_tls_security_level = may
smtpd_tls_key_file = /usr/local/etc/postfix/server.pem
smtpd_tls_cert_file = /usr/local/etc/postfix/server.pem
smtpd_tls_CAfile = /usr/local/etc/postfix/server.pem
smtpd_tls_loglevel = 1
smtpd_tls_received_header = yes
smtpd_tls_session_cache_timeout = 3600s
broken_sasl_auth_clients = yes
tls_random_source = dev:/dev/urandom
备份用: cp -p /usr/local/etc/postfix/main.cf /root/allConfig/
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
创建用户信箱目录: ( *** Extmail会将所有email地址自动转为小楷,因为用户名不能含有大楷 ***)
mkdir -p /var/mail/sampleTest.com/service/cur ; mkdir -p /var/mail/sampleTest.com/service/new ; mkdir -p /var/mail/sampleTest.com/service/tmp;
userdb service@sampleTest.com set home=/var/mail/sampleTest.com/service mail=/var/mail/sampleTest.com/service uid=125 gid=125 && makeuserdb
产生加密的登入密码: userdbpw -md5 | userdb service@sampleTest.com set systempw && makeuserdb
产生SMTP验证密码: (储存在 /usr/local/etc/sasldb2, 用sasldblistusers2 显示设置的虚拟账号.)
saslpasswd2 -c -u `postconf -h myhostname` service@sampleTest.com
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
安装clamav: (选择全部) cd /usr/ports/security/clamav && make install FORCE_PKG_REGISTER="yes" clean
在 vi /etc/rc.conf 中加入以下设定后Reboot: (http://www.clamav.net/)
# Anti-Virus
clamav_clamd_enable="YES"
clamav_freshclam_enable="YES"
freshclam_flags="--checks=24"
clamav_milter_enable="YES"
clamav_milter_flags="--force-scan --timeout=0 --max-children=50"
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
安装SpamAssassin : (http://spamassassin.apache.org/, 除PGSQL之外全选)
cd /usr/ports/mail/p5-Mail-SpamAssassin && make install FORCE_PKG_REGISTER="yes" clean
vi /etc/rc.conf 加入:
spamd_enable="YES"
spamd_flags="-u spamd -H /var/spool/spamd -s /var/log/spamd.log"
vi /usr/local/etc/mail/spamassassin/local.cf 加入:
# local domain from but ip not match
header __FROM_TEATIME Received =~ /from sampleTest.com/i
meta FROM_TEATIME_BUT_IP_ERROR (__FROM_TEATIME)
describe FROM_TEATIME_BUT_IP_ERROR From sampleTest.com but ip not match
score FROM_TEATIME_BUT_IP_ERROR 8
ok_languages all
score HEADER_8BITS 0
score SUBJ_FULL_OF_8BITS 0
score HTML_COMMENT_8BITS 0
score UPPERCASE_25_50 0
score UPPERCASE_50_75 0
score UPPERCASE_75_100 0
修改Postfix设定档: vi /usr/local/etc/postfix/main.cf
header_checks = regexp:/usr/local/etc/postfix/header_checks # 去掉#号
vi /usr/local/etc/postfix/header_checks 修改 :
/^Received:/ HOLD
/filename\=\".*src\.exe/ REJECT Virus filename is unavailable header
/filename\=\".*\.cpl\"/ REJECT Virus filename is unavailable header
/name\=\".*\.bat\"/ REJECT Virus filename is unavailable header
/name\=\".*\.scr/ REJECT Virus filename is unavailable header
/^Subject:.*W32.*removal\ tools$/ DISCARD Virus drop the unavailable header
/^From:.*sex\.com\.net/ DISCARD Commercial unavailable header
/^From:.*\@sex\.net\.com/ DISCARD Commercial unavailable header
/^To:.*\.TXT@/ DISCARD Commercial unavailable header
/^X-Spam-Status:/ Yes
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
安装MailScanner :
cd /tmp && axel -n 10 http://www.mailscanner.info/files/4/tar/MailScanner-install-4.67.6-1.tar.gz
tar -xvf MailScanner-install-*
cd /tmp/MailScanner-install-* && ./install.sh --perl=/usr/local/bin/perl 或用 cd /tmp/MailScanner-install-* && ./install.sh --perl=/usr/bin/perl5
rm -Rf /tmp/MailScanner-install-*
安装目录默认在: /opt/MailScanner, 配置文件在: /opt/MailScanner/etc/ 所有执行档在/opt/MailScanner/bin/
vi /etc/rc.local 加入以下, 令mailScanner在boot机时启动:
# enable mailScanner
/opt/MailScanner/bin/check_mailscanner
修改 vi /opt/MailScanner/etc/MailScanner.conf (官方设定:http://www.mailscanner.info/MailScanner.conf.index.html)
%org-name% = sampleTest
%org-long-name% = sampleTest.com
%web-site% = http://www.sampleTest.com
# set to 10 is best after testing
Max Children = 10
Run As User = postfix
Run As Group = mail
Queue Scan Interval = 3
Incoming Queue Dir = /var/spool/postfix/hold
Outgoing Queue Dir = /var/spool/postfix/incoming
MTA = postfix
#Sendmail = /usr/local/sbin/postfix
#Sendmail2 = /usr/local/sbin/sendmail
Incoming Work User = clamav
Incoming Work Group = clamav
Incoming Work Permissions = 0640
Max Unscanned Bytes Per Scan = 500m
Max Unsafe Bytes Per Scan = 250m
Max Unscanned Messages Per Scan = 200
Max Unsafe Messages Per Scan = 200
Virus Scanners = clamav
Use SpamAssassin = yes
Sign Clean Messages = no
Max Spam Check Size = 10240k
新增 MailScanner 所要用到的资料夹 :
mkdir -p /var/spool/MailScanner/incoming ; chown postfix:clamav /var/spool/MailScanner/incoming ;
mkdir -p /var/spool/MailScanner/quarantine ; chown postfix:postfix /var/spool/MailScanner/quarantine ;
chmod 0777 /var/spool/postfix |
_________________
熱心幫助他人, 即是幫助自己 ...
對新手, 盡可能去扶持一下, 又有何妨呢?
非常鄙視那些有點技術,就自以為是, 沾沾自喜的人, 不幫人也罷, 還出言諷刺新手, 別忘了, 你亦曾為新手 ... |
|
| 返回页首 |
|
|
adamson
道士
注册时间: 2004-08-04
文章: 593
来自: Shenzhen
|
| 发表于: Mon 2008-05-05 11:19:57 发表主题: |
|
|
首先处理好 port 安装的问题，然后停 clamav, MailScanner, SpamAssassin，然后再测试。
_________________
don't get mad, get bacula. |
|
| 返回页首 |
|
|
yes298
道童
注册时间: 2007-12-13
文章: 311
|
| 发表于: Mon 2008-05-05 11:31:34 发表主题: |
|
|
因为我的php发出的电邮是html格式的, 我将整个电邮的Body储存入txt檔,
打开一看, 整个Body是一行过的, 很长很长的一行, 这会否是因为太长而引致出现些怪问题呢?
_________________
熱心幫助他人, 即是幫助自己 ...
對新手, 盡可能去扶持一下, 又有何妨呢?
非常鄙視那些有點技術,就自以為是, 沾沾自喜的人, 不幫人也罷, 還出言諷刺新手, 別忘了, 你亦曾為新手 ... |
|
| 返回页首 |
|
|
yes298
道 | |
常见问题
搜索
会员列表
团队
注册
个人资料
登录查看您的站内信件
登录
